Test directory
Search by standard, test name, product type or market.
23 matching tests
EN 13823
Reaction-to-fire testing for construction products exposed to thermal attack from a single burning item.
EN ISO 11925-2
Determines the ignitability of building products in the vertical orientation when subjected to impingement of a standard small flame.
EN ISO 1182
Determines the non-combustibility performance of homogeneous products and substantial components of non-homogeneous building products.
EN ISO 1716
Determines the potential maximum total heat release of a product when completely burning, regardless of its end use.
EN ISO 9239-1
Measures the critical radiant flux of horizontally mounted floor covering systems exposed to a flaming ignition source in a graded radiant heat environment.
EN 50399
Evaluates the potential contribution of a cable to the early stages of a fire under direct exposure to a 20.5 kW or 30 kW flame source.
EN IEC 60332-3-10 · EN IEC 60332-3-24
Assesses vertical flame spread of vertically mounted bunched wires or cables, electrical or optical, under defined conditions.
EN 60332-1-2
Evaluates the flame spread of a single vertical insulated conductor, cable or optical fibre cable exposed to a 1 kW pre-mixed flame.
EN 61034-2
Measures smoke emission when electric cables are burned under defined conditions in the 3 Metre Cube.
EN 60754-1 · EN 60754-2
Determines the degree of acidity of gases evolved during combustion of materials taken from electric cables by measuring pH and conductivity.
NF X 70-100
Tube furnace toxicity test used to determine the Conventional Index of Toxicity (CIT) for non-listed railway products.
ISO 5658-2
Measures the lateral spread of flame along the surface of a vertically orientated specimen subject to radiated heat in the presence of a pilot flame.
ISO 5660-1 · ASTM E1354
The most significant bench-scale instrument in fire testing — measures heat release, smoke production and mass loss under preset fire conditions.
BS EN ISO 5659-2 · ASTM E662
Determines the specific optical density of smoke generated by solid materials and assemblies in a closed chamber.
ISO 19702 · EN 17084
Fourier-transform infrared analysis of toxic fire effluents — the method chosen by ISO, EN and IMO committees for measuring toxic species.
ASTM D7309
Determines fundamental thermo-chemical data in seconds from 1–5 mg specimens and predicts fire properties of materials.
UL 94
Measures flammability characteristics of plastic materials, determining 12 flame classifications for specific applications.
FMVSS 302 · ISO 3795
Specifies burn resistance requirements for materials used in the occupant compartments of motor vehicles.
BS EN ISO 4589-2 · ASTM D2863
Measures the minimum percentage of oxygen in a test atmosphere required to marginally support combustion.
BS EN ISO 4589-3
Determines the oxygen index at temperatures up to 125°C — a better determinant of combustibility than the conventional oxygen index.
FAA Fire Test Handbook
Bunsen burner test apparatus conforming to the fire test methods described in the FAA Aircraft Materials Fire Test Handbook.
ISO 9705-2
Full-scale calorimetry of complete seat assemblies, used to determine MARHE according to EN 45545-2.
DEF STAN 02-713 · NES 713
Explores the toxicity of combustion products when a sample of material is completely burnt in excess air under specified conditions.
If you don't know which standard your product should be tested to, or the standard is not listed, please contact us to discuss your options.
